Unit 6 Lab - Firewalls

If you are unable to finish the lab in the ProLUG lab environment we ask you reboot the machine from the command line so that other students will have the intended environment.

Required Materials

Rocky 9.4+ - ProLUG Lab
- Or comparable Linux box
root or sudo command access

Downloads

The lab has been provided for convenience below:

Pre-Lab Warm-Up

Exercises (Warmup to quickly run through your system and practice commands)

cd~
pwd (should be /home/<yourusername>)
cd /tmp
pwd (should be /tmp)
cd
pwd (should be /home/<yourusername>)
mkdir lab_firewalld
cd lab_firewalld
touch testfile1
ls
touch testfile{2..10}
ls
seq 10
seq 1 10
seq 1 2 10
- man seq and see what each of those values mean. It’s important to know the behavior if you intend to ever use the command, as we often do with counting (for) loops.

No worries, there are two ways to fix the mess you've made. Nothing you've done is permanent, so logging out and reloading a shell (logging back in) would fix this.
We just put the aliases back.

for i in seq 1 10; do touch file$i; done;
ls
- Think about some of those commands and when you might use them. Try to change command #15 to remove all of those files (rm -rf file$i)

Lab 🧪

This lab is designed to help you get familiar with the basics of the systems you will be working on.

Some of you will find that you know the basic material but the techniques here allow you to put it together in a more complex fashion.

It is recommended that you type these commands and do not copy and paste them. Browsers sometimes like to format characters in a way that doesn't always play nice with Linux.

Check Firewall Status and settings:

A very important thing to note before starting this lab. You’re connected into that server on ssh via port 22. If you do anything to lockout port 22 in this lab, you will be blocked from that connection and we’ll have to reset it.

Check firewall status

[root@schampine ~]# systemctl status firewalld

Example Output:

firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled; vendor preset: enabled)
Active: inactive (dead) since Sat 2017-01-21 19:27:10 MST; 2 weeks 6 days ago
 Main PID: 722 (code=exited, status=0/SUCCESS)

Jan 21 19:18:11 schampine firewalld[722]: 2017-01-21 19:18:11 ERROR: COMMAND....
Jan 21 19:18:13 schampine firewalld[722]: 2017-01-21 19:18:13 ERROR: COMMAND....
Jan 21 19:18:13 schampine firewalld[722]: 2017-01-21 19:18:13 ERROR: COMMAND....
Jan 21 19:18:13 schampine firewalld[722]: 2017-01-21 19:18:13 ERROR: COMMAND....
Jan 21 19:18:13 schampine firewalld[722]: 2017-01-21 19:18:13 ERROR: COMMAND....
Jan 21 19:18:14 schampine firewalld[722]: 2017-01-21 19:18:14 ERROR: COMMAND....
Jan 21 19:18:14 schampine firewalld[722]: 2017-01-21 19:18:14 ERROR: COMMAND....
Jan 21 19:18:14 schampine firewalld[722]: 2017-01-21 19:18:14 ERROR: COMMAND....
Jan 21 19:27:08 schampine systemd[1]: Stopping firewalld - dynamic firewall.....
Jan 21 19:27:10 schampine systemd[1]: Stopped firewalld - dynamic firewall ...n.

Hint: Some lines were ellipsized, use -l to show in full.

If necessary start the firewalld daemon:

systemctl start firewalld

Set the firewalld daemon to be persistent through reboots:

systemctl enable firewalld

Verify with systemctl status firewalld again from step 1

Check which zones exist:

firewall-cmd --get-zones

Checking the values within each zone:

firewall-cmd --list-all --zone=public

General Output

public (default, active)
interfaces: wlp4s0
sources:
services: dhcpv6-client ssh
ports:
masquerade: no
forward-ports:
icmp-blocks:
rich rules:

Checking the active and default zones:

firewall-cmd --get-default

Example Output:

public

Next Command

firewall-cmd --get-active

Example Output:

public
interfaces: wlp4s0

Note: this also shows which interface the zone is applied to. Multiple interfaces and zones can be applied

So now you know how to see the values in your firewall. Use steps 4 and 5 to check all the values of the different zones to see how they differ.

Set the firewall active and default zones:

We know the zones from above, set your firewall to the different active or default zones. Default zones are the ones that will come up when the firewall is restarted.

Note: It may be useful to perform an ifconfig -a and note your interfaces for the next part

ifconfig -a | grep -i flags

Example Output:

[root@rocky ~]# ifconfig -a | grep -i flags
docker0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
ens32: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536

Changing the default zones (This is permanent over a reboot, other commands require --permanent switch)

firewall-cmd --set-default-zone=work

Example Output:

success

Next Command:

firewall-cmd --get-active-zones

Example Output:

work
    interfaces: wlp4s0

Attempt to set it back to the original public zone and verify. Set it to one other zone, verify, then set it back to public.

Changing interfaces and assigning different zones (use another interface from your earlier ifconfig -a

firewall-cmd --change-interface=virbr0 --zone dmz

Example Output:

success

Next Command:

firewall-cmd --add-source 192.168.11.0/24 --zone=public

Example Output:

success

Next Command:

firewall-cmd --get-active-zones

Example Output:

dmz
   interfaces: virbr0
work
   interfaces: wlp4s0
public
   sources: 192.168.200.0/24

Working with ports and services:

We can be even more granular with our ports and services. We can block or allow services by port number, or we can assign port numbers to a service name and then block or allow those service names.

List all services assigned in firewalld

firewall-cmd --get-services

Example Output:

RH-Satellite-6 amanda-client bacula bacula-client dhcp dhcpv6 dhcpv6-client dns freeipa-ldap freeipa-ldaps freeipa-replication ftp high-availability http https imaps ipp ipp-client ipsec iscsi-target kerberos kpasswd ldap ldaps libvirt libvirt-tls mdns mountd ms-wbt mysql nfs ntp openvpn pmcd pmproxy pmwebapi pmwebapis pop3s postgresql proxy-dhcp radius rpc-bind rsyncd samba samba-client smtp ssh telnet tftp tftp-client transmission-client vdsm vnc-server wbem-https

This next part is just to show you where the service definitions exist. They are simple xml format and can easily be manipulated or changed to make new services. This would require a restart of the firewalld service to re-read this directory.

Next Command:

ls /usr/lib/firewalld/services/

Example Output:

amanda-client.xml        iscsi-target.xml  pop3s.xml
bacula-client.xml        kerberos.xml      postgresql.xml
bacula.xml               kpasswd.xml       proxy-dhcp.xml
dhcpv6-client.xml        ldaps.xml         radius.xml
dhcpv6.xml               ldap.xml          RH-Satellite-6.xml
dhcp.xml                 libvirt-tls.xml   rpc-bind.xml
dns.xml                  libvirt.xml       rsyncd.xml
freeipa-ldaps.xml        mdns.xml          samba-client.xml
freeipa-ldap.xml         mountd.xml        samba.xml
freeipa-replication.xml  ms-wbt.xml        smtp.xml
ftp.xml                  mysql.xml         ssh.xml
high-availability.xml    nfs.xml           telnet.xml
https.xml                ntp.xml           tftp-client.xml
http.xml                 openvpn.xml       tftp.xml
imaps.xml                pmcd.xml          transmission-client.xml
ipp-client.xml           pmproxy.xml       vdsm.xml
ipp.xml                  pmwebapis.xml     vnc-server.xml
ipsec.xml                pmwebapi.xml      wbem-https.xml

Next Command:

cat /usr/lib/firewalld/services/http.xml

Example Output:

<?xml version="1.0" encoding="utf-8"?>
<service>
  <short>WWW (HTTP)</short>
  <description>HTTP is the protocol used to serve Web pages. If you plan to make your Web       server publicly available, enable this option. This option is not required for viewing pages locally or developing Web pages.</description>
  <port protocol="tcp" port="80"/>
</service>

Adding a service or port to a zone

Ensuring we are working on a public zone
```
firewall-cmd --set-default-zone=public
```
Example Output:
```
success
```
Listing Services
```
firewall-cmd --list-services
```
Example Ouput:
```
dhcpv6-client ssh
```
Note: We have 2 services

Permanently adding a service with the --permanent switch
```
firewall-cmd --permanent --add-service ftp
```
Example Output:
```
success
```
Reloading
```
firewall-cmd --reload
```
Example Output:
```
success
```
Verifying we are in the correct Zone
```
firewall-cmd --get-default-zone
```
Example Output:
```
public
```
Verifying that we have successfully added the FTP service
```
firewall-cmd --list-services
```
Example Output:
```
dhcpv6-client ftp ssh
```
Alternatively, we can do almost the same thing but not use a defined service name. If I just want to allow port 1147 through for TCP traffic, it is very simple as well.
```
firewall-cmd --permanent --add-port=1147/tcp
```
Example Output:
```
success
```
Reloading once again
```
firewall-cmd --reload
```
Example Output:
```
success
```
Listing open ports now
```
[root@schampine services]# firewall-cmd --list-ports
```
Example Output:
```
1147/tcp
```
Removing unwanted services or ports

To remove those values and permanently fix the configuration back we simply use remove.

Firstly, we will permanently remove ftp service
```
firewall-cmd --permanent --remove-service=ftp
```
Example Output:
```
success
```
Then we will permanently remove the ports
```
firewall-cmd --permanent --remove-port=1147/tcp
```
Example Output:
```
success
```
Now lets do a reload
```
firewall-cmd --reload
```
Example Output:
```
success
```
Now we can list services again to confirm our work
```
firewall-cmd --list-services
```
Example Output:
```
dhcpv6-client ssh
```
Now we can list ports
```
firewall-cmd --list-ports
```
Example Output:

Nothing

Before making any more changes I recommend running the list commands above with >> /tmp/firewall.orig on them so you have all your original values saved somewhere in case you need them.

So now take this and set up some firewalls on the interfaces of your system. Change the default ports and services assigned to your different zones (at least 3 zones) Read the man firewall-cmd command or firewall-cmd -help to see if there are any other userful things you should know.

Be sure to reboot the lab machine from the command line when you are done.

Linux Administration Course

Unit 6 Lab - Firewalls

Resources / Important Links

Required Materials

Downloads

Pre-Lab Warm-Up

Lab 🧪

Check Firewall Status and settings:

If necessary start the firewalld daemon:

Set the firewalld daemon to be persistent through reboots:

Check which zones exist:

Checking the values within each zone:

Checking the active and default zones:

Set the firewall active and default zones:

Working with ports and services: